Small-angle neutron scattering from micelles of alkylpolyoxyethylene sulfate: Effect of chain length

Small-angle neutron scattering (SANS) data have been obtained for (i) a series of solutions of C _m H_2m+1(OCH₂–CH₂)₂SO₄Na, for m=18, 16, and 14; (ii) an approximately 0.07M solution of C₁₄H₂₉(OCH₂–CH₂)₂SO₄Na to which different amounts of NaCl were added; and (iii) a series of solutions of variable concentration of C₁₂H₂₅(OCH₂–CH₂)SO₄Na. The increase of the number of carbon atoms of the hydrocarbon chain produces a noticeable increase of the aggregation number of the micelles, while the salt tolerance decreases with increasing m. All the data can be described in terms of a monodispersed, charged, hard-spheres model interacting via a screened Coulombic potential, except the run at highest salt concentration, for which an ellipsoid model gives better results.     

Volumetric Properties of Aqueous 2-Chloroethanol Solutions and Volumes of Transfer of Some Amino Acids and Peptides from Water to Aqueous 2-Chloroethanol Solutions

Densities and apparent molar volumes of aqueous 2-chloroethanol were determined at temperatures from 15.0 to 34.4°C using digital densimetry. The results of the volumetric measurements have been used to calculate the following thermodynamic quantites at 25°C: V ₂ ^o = 55.05 ± 0.02 cm³-mol^–1, (V ₂ ^o/T)_p = 0.01486 ± 0.00318 cm³-K^–1-mol^–1, and (² V ₂ ^o/T ²)_p = 0.02972 ± 0.00318 cm³-K^–2-mol^–1. Partial molar volumes of transfer from water to 1 mol-dm^–3 2-chloroethanol have also been determined for L-glycine, L-alanine, L-serine, L-glutamic acid, and L-aspartic acid at 35.0°C. The transfer results have been explained in terms of the nature of the interactions of the groups in the solute and solvent. Hydration numbers of L-glycine and L-alanine have also been calculated in aqueous 2-chloroethanol.     

TiO2/P(VdF-HFP)杂化纤维微孔膜的制备及其电化学性能

用电纺法制备了TiO₂/P(VdF-HFP)(聚偏氟乙烯-六氟丙烯共聚物)杂化纤维微孔膜, 用SEM观察了杂化纤维微孔膜的形貌, 并测算了这类由超细纤维相互搭接而形成的微孔膜的孔隙率. 这种微孔膜吸附LiPF₆/EC-DMC-EMC(碳酸乙烯酯-二甲基碳酸酯-碳酸甲乙酯)电解质溶液后得到凝胶聚合物电解质膜. 用电化学方法测试了聚合物电解质膜的离子电导率、锂离子迁移数等参数, 并研究了TiO₂纳米晶的掺入对聚合物电解质电化学性能的影响. 结果表明, TiO₂的掺入降低了P(VdF-HFP)聚合物基体的结晶度, 改善了凝胶聚合物电解质的低温电化学性能.     

2-(8-羟基喹啉-5-磺酸-7-偶氮)-1,8-二羟基-3,6-萘二磺酸与牛血清白蛋白的相互作用

用平衡透析法和分光光度法研究了 2 (8 羟基喹啉 5 磺酸 7 偶氮 ) 1,8 二羟基 3,6 萘二磺酸与牛血清白蛋白 (BSA)在酸性溶液中的结合反应 ,认为 8Q5SAC与BSA之间的结合力是以静电引力为主的非共键作用力 ,并探讨了其结合模型。在 2 98K下 ,测得这一反应的最大结合数为 35～ 40 ,结合常数为 6 .1× 10 5L mol。还研究了溶液基本条件如酸度和离子强度等对 8Q5SAC与牛血清白蛋白分子复合物形成的影响 ,在pH =3.34条件下 ,标准工作曲线的线性范围为 0 .2 0～ 46 .90mg L。     

流通池光度滴定法应用—络合反应中的质子释放数测定

用具有流通池的分光光度计作测定装置,建立了由平衡移动法测定络合反应中质子释放数的新方法。方法简单、快速,仅用一个标准溶液,适于在变更pH值范围内金属离子不发生水解和没有其他副反应的体系。     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.     

6元素集合上T0拓扑总数的计算

文中证明了有限预序集与有限偏序集的一些性质,并基于有限集上的拓扑和其上预序的一一对应关系,利用这些性质通过对极小元和极大元个数进行分类讨论,以一种有别于计算机算法而又容易理解的计算方法得出6元素集合上的T₀拓扑总数为130023.     

考虑偏差值的中立型区间交叉效率研究

在不确定性环境下,当决策单元(DMU)的投入产出数据为区间数形式时,为解决决策单元之间既不是合作也不是竞争关系时的交叉评价问题,本文提出一种中立型区间交叉效率模型。从所有被评价者的角度出发解决评价权重的选取问题,以决策单元投入得分的平均偏差与产出得分的平均偏差之和最小化为目标,建立决策单元在最佳和最差两种生产状态下的中立型区间交叉效率模型。在本文提出的中立型模型视角下,DMU的投入得分平均偏差和产出得分平均偏差之和达到最小。算例结果表明该中立型区间交叉效率模型的有效性,解决了不确定性环境下的交叉评价问题,保证评价的客观公正,更加符合现实。     

基于统一灰色生成算子的三参数离散灰色预测模型及其应用

现有三参数离散灰色预测模型的累加阶数取值范围局限于正实数,导致模型建模能力和作用空间受限。为此,论文首先引入实数域统一灰色生成算子;然后,基于统一灰色生成算子构造了新型三参数离散灰色预测模型,实现了其阶数从正实数到全体实数的拓展与优化,从而使得新型模型具备挖掘时序数据积分特性与差异信息的双重功能;最后,将该新模型应用于某装甲装备维修经费的建模,结果显示其精度优于其它同类灰色模型。本研究成果对完善灰色算子基础理论及提高灰色预测模型建模能力具有重要价值。